docker-mailserver/CHANGELOG.md
Georg Lauterbach 8f391e4d5a
release: v13.2.0 (#3746)
* bump `VERSION` & adjust `CHANGELOG.md`

* chore: Bump the unreleased base compare tag in `CHANGELOG.md`

---------

Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
2024-01-04 22:14:51 +01:00

80 KiB

Changelog

All notable changes to this project will be documented in this file. The format is based on Keep a Changelog, and this project adheres to Semantic Versioning.

Unreleased

Note

: Changes and additions listed here are contained in the :edge image tag. These changes may not be as stable as released changes.

v13.2.0

Security

DMS is now secured against the recently published spoofing attack "SMTP Smuggling" that affected Postfix (#3727):

  • Postfix upgraded from 3.5.18 to 3.5.23 which provides the long-term fix with smtpd_forbid_bare_newline = yes
  • If you are unable to upgrade to this release of DMS, you may follow these instructions for applying the short-term workaround.
  • This change should not cause compatibility concerns for legitimate mail clients, however if you use software like netcat to send mail to DMS (like our test-suite previously did) it may now be rejected (especially with the the short-term workaround smtpd_data_restrictions = reject_unauth_pipelining).
  • NOTE: This Postfix update also includes the new parameter smtpd_forbid_bare_newline_exclusions which defaults to $mynetworks for excluding trusted mail clients excluded from the restriction.
    • With our default PERMIT_DOCKER=none this is not a concern.
    • Presently the Docker daemon config has user-proxy: true enabled by default.
      • On a host that can be reached by IPv6, this will route to a DMS IPv4 only container implicitly through the Docker network bridge gateway which rewrites the source address.
      • If your PERMIT_DOCKER setting allows that gateway IP, then it is part of $mynetworks and this attack would not be prevented from such connections.
      • If this affects your deployment, refer to our IPv6 docs for advice on handling IPv6 correctly in Docker. Alternatively use our postfix-main.cf to set smtpd_forbid_bare_newline_exclusions= as empty.

Updates

  • The test suite now uses swaks instead of nc, which has multiple benefits (#3732):
    • swaks handles pipelining correctly, hence we can now use reject_unauth_pipelining in Postfix's configuration.
    • swaks provides better CLI options that make many files superflous.
    • swaks can also replace openssl s_client and handles authentication on submission ports better.
  • Postfix:
    • We now defer rejection from unauthorized pipelining until the SMTP DATA command via smtpd_data_restrictions (i.e. at the end of the mail transfer transaction) (#3744)
      • Prevously our configuration only handled this during the client and recipient restriction stages. Postfix will flag this activity when encountered, but the rejection now is handled at DATA where unauthorized pipelining would have been valid from this point.
      • If you had the Amavis service enabled (default), this restriction was already in place. Otherwise the concerns expressed with smtpd_data_restrictions = reject_unauth_pipelining from the security section above apply. We have permitted trusted clients ($mynetworks or authenticated) to bypass this restriction.

v13.1.0

Added

  • Dovecot:
    • ENV ENABLE_IMAP (#3703)
  • Tests:
    • You can now use make run-local-instance to run a DMS image that was built locally to test changes (#3663)
  • Internal:
    • Log a warning when update-check is enabled, but no stable release image is used (#3684)

Updates

  • Documentation:
    • Debugging - Raise awareness in the troubleshooting page for a common misconfiguration when deviating from our advice by using a bare domain (#3680)
    • Debugging - Raise awareness of temporary downtime during certificate renewal that can cause a failure to deliver local mail (#3718)
  • Internal:
    • Postfix configures virtual_mailbox_maps and virtual_transport during startup instead of using defaults (configured for Dovecot) via our main.cf (#3681)
  • Rspamd:
    • Upgraded to version 3.7.5. This was previously inconsistent between our AMD64 (3.5) and ARM64 (3.4) images (#3686)

Fixed

  • Internal:
    • The container startup welcome log message now references DMS_RELEASE (#3676)
    • VERSION was incremented for prior releases to be notified of the v13.0.1 patch release (#3676)
    • VERSION is no longer included in the image (#3711)
    • Update-check: fix 'read' exit status (#3688)
    • ENABLE_QUOTAS=0 no longer tries to remove non-existent config (#3715)
    • The postgrey service now writes logs to the supervisor directory like all other services. Previously this was /var/log/mail/mail.log (#3724)
  • Rspamd:
    • Switch to official arm64 packages to avoid segfaults (#3686)
  • CI / Automation:

v13.0.1

This patch release fixes two bugs that Rspamd users encountered with the v13.0.0 release. Big thanks to the those that helped to identify these issues! ❤️

Fixed

  • Internal:
    • The update check service now queries the latest GH release for a version tag (instead of from a VERSION file at the GH repo). This should provide more reliable update notifications (#3666)
  • Rspamd:
    • The check for correct permission on the private key when signing e-mails with DKIM was flawed. The result was that a false warning was emitted (#3669)
    • When RSPAMD_CHECK_AUTHENTICATED=0, DKIM signing for outbound e-mail was disabled, which is undesirable (#3669). Make sure to check the documentation of RSPAMD_CHECK_AUTHENTICATED!

v13.0.0

Breaking

  • LDAP:
    • ENV LDAP_SERVER_HOST, DOVECOT_URIS, and SASLAUTHD_LDAP_SERVER will now log an error if the LDAP URI scheme is missing. Previously there was an implicit fallback to ldap:// (#3522)
    • ENABLE_LDAP=1 is no longer supported, please use ACCOUNT_PROVISIONER=LDAP (#3507)
  • Rspamd:
    • The deprecated path for the Rspamd custom commands file (/tmp/docker-mailserver/rspamd-modules.conf) now prevents successful startup. The correct path is /tmp/docker-mailserver/rspamd/custom-commands.conf.
  • Dovecot:
    • Dovecot mail storage per account in /var/mail previously shared the same path for the accounts home directory (#3335)
      • The home directory now is a subdirectory home/. This change better supports sieve scripts.
      • NOTE: The change has not yet been implemented for ACCOUNT_PROVISIONER=LDAP.
  • Postfix:
    • /etc/postfix/master.cf has renamed the "smtps" service to "submissions" (#3235)
      • This is the modern /etc/services name for port 465, aligning with the similar "submission" port 587.
    • Postfix now defaults to supporting DSNs (Delivery Status Notifications) only for authenticated users (via ports 465 + 587). This is a security measure to reduce spammer abuse of your DMS instance as a backscatter source. (#3572)
      • If you need to modify this change, please let us know by opening an issue / discussion.

      • You can opt out (enable DSNs) via the postfix-main.cf override support using the contents: smtpd_discard_ehlo_keywords =.

      • Likewise for authenticated users, the submission(s) ports (465 + 587) are configured internally via master.cf to keep DSNs enabled (since authentication protects from abuse).

        If necessary, DSNs for authenticated users can be disabled via the postfix-master.cf override with the following contents:

        submission/inet/smtpd_discard_ehlo_keywords=silent-discard,dsn
        submissions/inet/smtpd_discard_ehlo_keywords=silent-discard,dsn
        

Added

  • Features:
    • getmail as an alternative to fetchmail (#2803)
    • setup CLI - setup fail2ban gained a new status <JAIL> subcommand (#3455)
  • Environment Variables:
    • MARK_SPAM_AS_READ. When set to 1, marks incoming spam as "read" to avoid unwanted "new mail" notifications for junk mail (#3489)
    • DMS_VMAIL_UID and DMS_VMAIL_GID allow changing the default ID values (5000:5000) for the Dovecot vmail user and group (#3550)
    • RSPAMD_CHECK_AUTHENTICATED allows authenticated users to avoid additional security checks by Rspamd (#3440)
  • Documentation:
    • Use-case examples / tutorials:
      • iOS mail push support (#3513)
      • Guide for setting up Dovecot Authentication via Lua (#3579)
      • Guide for integrating with the Crowdsec service (#3651)
    • Debugging page:
      • New compatibility section (#3404)
      • Now advises how to (re)start DMS correctly (#3654)
    • Better communicate distinction between DMS FQDN and DMS mail accounts (#3372)
    • Traefik example now includes passthrough=true on implicit ports (#3568)
    • Rspamd docs have received a variety of revisions (#3318, #3325, #3329)
    • IPv6 config examples with content tabs (#3436)
    • Mention internet.nl as another testing service (#3445)
    • setup alias add ... CLI help message now includes an example for aliasing to multiple recipients (#3600)
    • SPAMASSASSIN_SPAM_TO_INBOX=1, now emits a debug log to raise awareness that SA_KILL will be ignored (#3360)
    • CLAMAV_MESSAGE_SIZE_LIMIT now logs a warning when the value exceeds what ClamAV is capable of supporting (4GiB max scan size #3332, 2GiB max file size #3341)
    • Added note to caution against changing mydestination in Postfix's main.cf (#3316)
  • Internal:
    • Added a wrapper to update Postfix configuration safely (#3484, #3503)
    • Add debug group to packages.sh (#3578)
  • Tests:
    • Additional linting check for BASH syntax (#3369)

Updates

  • Misc:
    • Changed setup config dkim default key size to 2048 (open-dkim) (#3508)
  • Postfix:
    • Dropped special bits from maildrop/ and public/ directory permissions (#3625)
  • Rspamd:
    • Adjusted learning of ham (#3334)
    • Adjusted antivirus.conf (#3331)
    • logrotate setup + Rspamd log path + tests log helper fallback path (#3576)
    • Setup during container startup is now more resilient (#3578)
    • Changed DKIM default config location (#3597)
    • Removed the symlink for the override.d/ directory in favor of using cp, integrated into the changedetector service, added a --force option for the Rspamd DKIM management, and provided a dedicated helper script for common ENV variables (#3599)
    • Required permissions are now verified for DKIM private key files (#3627)
  • Documentation:
    • Documentation aligned to Compose v2 conventions, docker-compose command changed to docker compose, docker-compose.yaml to compose.yaml (#3295)
    • Restored missing edit button (#3338)
    • Complete rewrite of the IPv6 page (#3244, #3531)
    • Complete rewrite of the "Update and Cleanup" maintenance page (#3539, #3583)
    • Improved debugging page advice on working with logs (#3626, #3640)
    • Clarified the default for ENV FETCHMAIL_PARALLEL (#3603)
    • Removed port 25 from FAQ entry for mail client ports supporting authenticated submission (#3496)
    • Updated home path in docs for Dovecot Sieve (#3370, #3650)
    • Fixed path to rspamd.log (#3585)
    • "Optional Config" page now uses consistent lowercase convention for directory names (#3629)
    • CONTRIBUTORS.md: Removed redundant "All Contributors" section (#3638)
  • Internal:
    • LDAP config improvements (Removed implicit ldap:// LDAP URI scheme fallback) (#3522)
    • Changed style conventions for internal scripts (#3361, #3364, #3365, #3366, #3368, #3464)
  • CI / Automation:
    • .gitattributes now ensures files are committed with eol=lf (#3527)
    • Revised the GitHub issue bug report template (#3317, #3381, #3435)
    • Clarified that the issue tracker is not for personal support (#3498, #3502)
    • Bumped versions of miscellaneous software (also shoutout to @dependabot) (#3371, #3584, #3504, #3516)
  • Tests:
    • Refactored LDAP tests to current conventions (#3483)
    • Changed OpenLDAP image to bitnami/openldap (#3494)
    • Revised LDAP config + setup (#3514)
    • Added tests for the helper function _add_to_or_update_postfix_main() (#3505)
    • EditorConfig Checker lint now uses a mount path to /check instead of /ci (#3655)

Fixed

  • Security:
    • Fixed issue with concatenating $dmarc_milter and $dkim_milter in main.cf (#3380)
    • Fixed Rspamd DKIM signing for inbound emails (#3439, #3453)
    • OpenDKIM key generation is no longer broken when Rspamd is also enabled (#3535)
  • Internal:
    • The "database" files (for managing users and aliases) now correctly filters within lookup query (#3359)
    • _setup_spam_to_junk() no longer registered when SMTP_ONLY=1 (#3385)
    • Dovecot fts_xapian is now compiled from source to match the Dovecot package ABI (#3373)
  • CI:
    • Scheduled build now have the correct permissions to run successfully (#3345)
  • Documentation:
  • Tests:
    • Run pgrep within the actual container (#3553)
    • lmtp_ip.bats improved partial failure output (#3552)
    • Improvements to LDIF test data (#3506)
    • Normalized for .gitattributes + improved eclint coverage (#3566)
    • Fixed ShellCheck linting for BATS tests (#3347)

v12.1.0

Added

  • Rspamd:
    • note about Rspamd's web interface (#3245)
    • add greylisting option & code refactoring (#3206)
    • added HFILTER_HOSTNAME_UNKNOWN and make it configurable (#3248)
    • add option to re-enable reject_unknown_client_hostname after #3248 (#3255)
    • add DKIM helper script (#3286)
  • make policyd-spf configurable (#3246)
  • add 'log' command to set up for Fail2Ban (#3299)
  • setup command now expects accounts and aliases to be mutually exclusive (#3270)

Updated

  • update DKIM/DMARC/SPF docs (#3231)
  • Fail2Ban:
    • made config more aggressive (#3243 & #3288)
    • update fail2ban config examples with current DMS default values (#3258)
    • make Fail2Ban log persistent (#3269)
    • update F2B docs & bind mount links (#3293)
  • Rspamd:
  • improve shutdown function by making PANIC_STRATEGY obsolete (#3265)
  • update bug_report.yml (#3275)
  • simplify bug_report.yml (#3276)
  • revised the contributor workflow (#2227)

Changed

  • default registry changed from DockerHub (docker.io) to GHCR (ghcr.io) (#3233)
  • consistent namings in docs (#3242)
  • get all policyd-spf setup in one place (#3263)
  • miscellaneous script improvements (#3281)
  • update FAQ entries (#3294)

Fixed

  • GitHub Actions docs update workflow (#3241)
  • fix dovecot: ldap mail delivery works (#3252)
  • shellcheck: do not check .git folder (#3267)
  • add missing -E for extended regexes in smtpd_sender_restrictions (#3272)
  • fix setting SRS_EXCLUDE_DOMAINS during startup (#3271)
  • remove superfluous EOF in dmarc_dkim_spf.sh (#3266)
  • apply fixes to helpers when using set -eE (#3285)

12.0.0

Notable changes are:

  • Rspamd feature is promoted from preview status
  • Services no longer use chroot
  • Fail2Ban major version upgrade
  • ARMv7 platform is no longer suppoted
  • TLS 1.2 is the minimum supported protocol
  • SMTP authentication on port 25 disabled
  • The value of smtpd_sender_restrictions for Postfix has replaced the value (#3127):
    • In main.cf with $dms_smtpd_sender_restrictions
    • In master.cf inbound submissions ports 465 + 587 extend this inherited smtpd restriction with $mua_sender_restrictions

Added

  • security: Rspamd support:
    • integration into scripts, provisioning of configuration & documentation (#2902,#3016,#3039)
    • easily adjust options & modules (#3059)
    • advanced documentation (#3104)
    • make disabling Redis possible (#3132)
    • persistence for Redis (#3143)
    • integrate into MOVE_SPAM_TO_JUNK (#3159)
    • make it possible to learn from user actions (#3159)
  • heavily updated CI & tests:
    • added functionality to send mail with a helper function (#3026,#3103,#3105)
    • add a dedicated page for tests with more information (#3019)
  • add information to Logwatch's mailer so Envelope From is properly set (#3081)
  • add vulnerability scanning workflow & security policy (#3106)
  • Add tools (ping & dig) to the image (2989)

Updates

  • Fail2Ban major version updated to v1.0.2 (#2959)
  • heavily updated CI & tests:
    • we now run more tests in parallel bringing down overall time to build and test AMD64 to 6 minutes (#2938,#3038,#3018,#3062)
    • remove CI ENV & disable fail-fast strategy (#3065)
    • streamlined GH Actions runners (#3025)
    • updated BATS & helper + minor updates to BATS variables (#2988)
    • improved consistency and documentation for test helpers (#3012)
  • improve the clean recipe (don't require sudo anymore) (#3020)
  • improve Amavis setup routine (#3079)
  • completely refactor README & parts of docs (#3097)
  • TLS setup (self-signed) error message now includes SS_CA_CERT (#3168)
  • Better default value for SA_KILL variable (#3058)

Fixed

  • restrict-access avoid inserting duplicates (#3067)
  • correct the casing for Mime vs. MIME (#3040)
  • Dovecot:
    • Quota plugin is now properly configured via mail_plugins at setup (#2958)
    • quota-status service (port 65265) now only binds to 127.0.0.1 (#3057)
  • OpenDMARC - Change default policy to reject (#2933)
  • Change Detection service - Use service reload instead of restarting process to minimize downtime (#2947)
  • Slightly faster container startup via postconf workaround (#2998)
  • Better group ownership to /var/mail-state + ClamAV in Dockerfile (#3011)
  • Dropping Postfix chroot mode:
    • Remove syslog socket created by Debian (#3134)
    • Supervisor proxy signals for postfix start-fg via PID (#3118)
  • Fixed several typos (#2990) (#2993)
  • SRS setup fixed (#3158)
  • Postsrsd restart loop fixed (#3160)
  • Order of DKIM/DMARC milters matters (#3082)
  • Make logrotate state persistant (#3077)

Changed

  • the Dovecot community repository is now the default (#2901)
  • moved SASL authentication socket location (#3131)
  • only add Amavis configuration to Postfix when enabled (#3046)
  • improve bug report template (#3080)
  • remove Postfix DNSBLs (#3069)
  • bigger script updates:
    • split setup-stack.sh (#3115)
    • housekeeping & cleanup setup (#3121,#3123)
    • issue warning in case of improper restart (#3129)
    • remove PostSRSD wrapper (#3128)
    • miscellaneous small improvements (#3144)
  • improve Postfix config for spoof protection (#3127)
  • Change Detection service - Remove 10 sec start-up delay (#3064)
  • Postfix:
    • Stop using chroot + remove wrapper script (#3033)
    • SMTP Authentication via port 25 disabled (#3006)
  • Fail2Ban - Added support packages + remove wrapper script (#3032)
  • Replace path with variable in mail_state.sh (#3153)

Removed

  • configomat (submodule) (#3045)
  • Due to deprecation:
    • ARMv7 image support (#2943)
    • TLS 1.2 is now the minimum supported protocol (#2945)
    • ENV SASL_PASSWD (#2946)
  • Redundant:
    • Makefile backup target (#3000)
    • ENV ENABLE_POSTFIX_VIRTUAL_TRANSPORT (#3004)
    • gamin package (#3030)

11.3.1

Fixed

  • build: Fix dovecot-fts-xapian dependency, when using dovecot community repository (#2937)

11.3.0

Added

  • scripts: Fail2ban - Enable network bans (#2818)
  • ci: run tests in parallel (#2857)
  • docs: added note about Docker version to documentation (#2799)

Changed

  • configuration: Run fetchmail not in verbose mode (#2859)
  • build: cleaned up Makefile and its targets (#2833)
  • configuration: adjust handling of DNSBL return codes (#2890)

Updates

  • ci: change to new output format in GH actions (#2892)
  • build: cleaned up Makefile (#2833)
  • tests: miscellaneous enhancements (#2815)

Fixed

  • scripts: ./setup.sh email list did not display aliases correctly (#2877)
  • scripts: Improve error handling, when parameters are missing (#2854)
  • scripts: Fix unbound variable error (#2849, #2853)
  • scripts: Make fetchmail data persistent (#2851)
  • scripts: Run user-patches.sh right before starting daemons (#2817)
  • scripts: Run Amavis cron job only when Amavis is enabled (#2831)
  • config: opendmarc.conf - Change the default OpenDMARC policy to reject (#2933)

Deprecation Notice

  • Removing TLS 1.0 and TLS 1.1 ciphersuites from TLS_LEVEL=intermediate You should not realistically need support for TLS 1.0 or TLS 1.1, except in niche scenarios such as an old printer/scanner device that refuses to negotiate a compatible non-vulnerable cipher. More details covered here.

  • SASL_PASSWD ENV An old ENV SASL_PASSWD has been around for supporting relay-host authentication, but since superceded by the postfix-sasl-password.cf config file. It will be removed in a future major release as detailed here.

  • Platform Support - ARMv7 This is a very old platform, superceded by ARMv8 and newer with broad product availability around 2016 onwards. Support was introduced primarily for users of the older generations of Raspberry Pi. ARM64 is the modern target for ARM devices.

    If you require ARMv7 support, please let us know.

11.2.0

Summary

This release features a lot of small and medium-sized changes, many related to how the image is build and tested during CI. The build now multi-stage based and requires Docker Buildkit, as the ClamAV Signatures are added via COPY --link ... during build-time.

Deprecated

  • The environment variable ENABLE_LDAP is deprecated and will be removed in [13.0.0]. Use ACCOUNT_PROVISIONER=LDAP now.

Added

  • documentation: improve cron tasks documentation and fix link in documentation
  • documentation: added link to brakkee.org for setup of docker-mailserver on Kubernetes
  • CI: better build caching for CI
  • CI: improve GitHub Action CI with re-usable workflows
  • tests: ensure excessive FD limits are avoided
  • configuration: added reject_unknown_client_hostname to main.cf

Changed

  • documentation: update and improve K8s documentation
  • scripts: set configomat output to loglevel debug
  • scripts: refactor CLI commands for database management
  • scripts: simplify Fail2Ban output
  • tests: update submodules for BATS
  • scripts: rework environment variables setup
  • scripts: revised linting script
  • scripts: addmailuser - remove delaying completion until /var/mail is ready
  • configuration: remove unnecessary postconf switch '-e' and use single quotes where possible
  • build: streamline COPY statements in Dockerfile
  • scripts: improve helpers/log.sh
  • build: adjust build arguments
  • build: enhance build process

Removed

  • configuration: remove unnecessary configuration files

Fixed

  • documentation: update documentation to fix regression causing broken links
  • scripts: _create_accounts() should run after waiting
  • scripts: only calculate checksums, when there are files to monitor.
  • tests: wait at least 30 seconds before checking the health state of the container
  • CI: add outputs to workflow_call on generic_build

Security

There are no security-related changes in this release.


Note

: This part of the changelog was created before switching to the "Keep a Changelog"-format.

v11.1.0

In this release the relay-host support saw significant internal refactoring in preparation for a future breaking change. Similar extensive restructuring through the codebase also occurred, where each PR provides more details. Care was taken to avoid breakage, but there may be some risk affecting unsupported third-party customizations which our test suite is unaware of.

Features

Fixes

  • Using Port 465 to authenticate with a relay-host no longer breaks the Amavis transport for Postfix (#2607)
  • When mounting /var/mail-state, disabled services will no longer copy over data redundantly (#2608)
  • Amavis is now aware of new domains detected during Change Detection, no longer skipping virus and spam filtering (#2616)
  • setup.sh -c <container name> no longer ignores <container name> when more than 1 docker-mailserver container is running (#2622)

Improvements

  • The Change Detector service will now only process relevant changes (#2615), in addition to now monitoring postfix-sasl-password.cf, postfix-relaymap.cf, and postfix-regexp.cf (#2623)
  • For LDAP users that only need to support a single mail domain, setup config dkim should now detect the domain implicitly (#2620)
  • The container capability SYS_PTRACE is no longer necessary (#2624)
  • Added an example for configuring a basic container healthcheck command (#2625)
  • Postfix main.cf setting compatibility_level was set to 2 during our startup scripts. This is now part of our default shipped main.cf config (#2597)
  • The Postfix main.cf override/extension support via postfix-main.cf has been improved to support multi-line values, instead of the previous single-line only support (#2598)

Deprecation Notice

  • SASL_PASSWD ENV An old ENV SASL_PASSWD has been around for supporting relay-host authentication, but since superceded by the postfix-sasl-password.cf config file. It will be removed in a future major release as detailed here.

  • Platform Support - ARMv7 This is a very old platform, superceded by ARMv8 and newer with broad product availability around 2016 onwards. Support was introduced primarily for users the older generations of Raspberry Pi. ARM64 is the modern target for ARM devices.

    If you require ARMv7 support, please let us know.

v11.0.0

Major Changes

  1. Internal logging has been refactored. The environment variable DMS_DEBUG has been replaced by LOG_LEVEL to better control the verbosity of logs we output. The new logger is more structured and follows standard log conventions. LOG_LEVEL can be set to: error, warn, info (default), debug and trace.
  2. iptables has been replaced by nftables. The Fail2Ban configuration was adjusted accordingly. If you use iptables yourself (e.g. in user-patches.sh), make sure to update the scripts.
  3. PERMIT_DOCKER has a new default value of none. This change better secures Podman; to keep the old behaviour (adding the container IP address to Postfix's mynetworks), use PERMIT_DOCKER=container.

Minor Changes

  1. Many minor improvements were made (cleanup & refactoring). Please refer to the section below to get an overview over all improvements. Moreover, there was a lot of cleanup in the scripts and in the tests. The documentation was adjusted accordingly.
  2. New environment variables were added:
    1. CLAMAV_MESSAGE_SIZE_LIMIT
    2. TZ
  3. SpamAssassin KAM was added with ENABLE_SPAMASSASSIN_KAM.
  4. The fail2ban command was reworked and can now ban IP addresses as well.
  5. There were a few small fixes, especially when it comes to bugs in scripts and service restart loops (no functionality changes, only fixes of existing functionality). When building an image from the Dockerfile - Installation of Postfix on modern Linux distributions should now always succeed.
  6. Some default values for environment values changed: these are mostly non-critical, please refer to #2428 and #2487.

Merged Pull Requests

  • [improvement] tests: remove legacy functions / tests #2434
  • [improvement] PERMIT_DOCKER=none as new default value #2424
  • [improvement] Adjust environment variables to more sensible defaults #2428
  • [fix] macOS linting support #2448
  • [improvement] Rename config examples directory #2438
  • [docs] FAQ - Update naked/bare domain section #2446
  • [improvement] Remove obsolete setup.sh debug inspect command from usage description #2454
  • [feature] Introduce CLAMAV_MESSAGE_SIZE_LIMIT env #2453
  • [fix] remove SA reload for KAM #2456
  • [docs] Enhance logrotate description #2469
  • [improvement] Remove macOS specific code / support + shellcheck should avoid python, regardless of permissions #2466
  • [docs] Update fail2ban.md #2484
  • [fix] Makefile: Remove backup/restore of obsolete config directory #2479
  • [improvement] scripts: small refactorings #2485
  • [fix] Building on Ubuntu 21.10 failing to install postfix #2468
  • [improvement] Use FQDN as REPORT_SENDER default value #2487
  • [improvement] Improve test, get rid of sleep #2492
  • [feature] scripts: new log #2493
  • [fix] Restart supervisord early #2494
  • [improvement] scripts: renamed function _errex -> _exit_with_error #2497
  • [improvement] Remove invalid URL from SPF message #2503
  • [improvement] scripts: refactored scripts located under target/bin/ #2500
  • [improvement] scripts: refactoring & miscellaneous small changes #2499
  • [improvement] scripts: refactored daemon-stack.sh #2496
  • [fix] add compatibility for Bash 4 to setup.sh #2519
  • [fix] tests: disabled "quota exceeded" test #2511
  • [fix] typo in setup-stack.sh #2521
  • [improvement] scripts: introduce _log to sedfile #2507
  • [feature] create .github/FUNDING.yml #2512
  • [improvement] scripts: refactored check-for-changes.sh #2498
  • [improvement] scripts: remove DMS_DEBUG #2523
  • [feature] firewall: replace iptables with nftables #2505
  • [improvement] log: adjust level and message(s) slightly for four messages #2532
  • [improvement] log: introduce proper log level fallback and env getter function #2506
  • [feature] scripts: added TZ environment variable to set timezone #2530
  • [improvement] setup: added grace period for account creation #2531
  • [improvement] refactor: letsencrypt implicit location discovery #2525
  • [improvement] setup.sh/setup: show usage when no argument is given #2540
  • [improvement] Dockerfile: Remove not needed ENVs and add comment #2541
  • [improvement] chore: (setup-stack.sh) Fix a small typo #2552
  • [feature] Add ban feature to fail2ban script #2538
  • [fix] Fix changedetector restart loop #2548
  • [improvement] chore: Drop setup.sh DATABASE fallback ENV #2556

v10.5.0

Critical Changes

  1. This release fixes a critical issue for LDAP users, installing a needed package on Debian 11 on build-time. Moreover, a race-condition was eliminated (#2341).
  2. A resource leak in check-for-changes.sh was fixed (#2401)

Other Minor Changes

  1. SPAMASSASSIN_SPAM_TO_INBOX's default changed to 1. (#2361)
  2. Changedetector functionality was added to SSL_TYPE=manual-setups. (#2404)
  3. Four new environment variables were introduced: LOGWATCH_SENDER, ENABLE_DNSBL, DOVECOT_INET_PROTOCOLS and ENABLE_SPAMASSASSIN_KAM. (#2362, #2342, #2358, #2418)
  4. There are plenty of bug fixes and documentation enhancements with this release.

Merged Pull Requests

  • [fix] added libldap-common to packages in Dockerfile in #2341
  • [fix] Prevent race condition on supervisorctl reload in #2343
  • [docs] Update links to dovecot docs in #2351
  • [fix] tests(fix): Align with upstream testssl field name change in #2353
  • [improvement] Make TLS tests more reliable in #2354
  • [feature] Introduce ENABLE_DNSBL env in #2342
  • [feature] Introduce DOVECOT_INET_PROTOCOLS env in #2358
  • [fix] Fix harmless startup errors in #2357
  • [improvement] Add tests for sedfile wrapper in #2363
  • [feature] add env var LOGWATCH_SENDER in #2362
  • [fix] Fixed non-number-argument in listmailuser in #2382
  • [fix] docs: Fail2Ban - Fix links for rootless podman in #2384
  • [fix] docs(kubernetes): fix image name in example in #2385
  • [fix] SSL documentation contains a small bug #2381 #2383
  • [fix] get rid of subshell + exec in helper-functions.sh in #2401
  • [docs] Rootless Podman security update #2393
  • [fix] fix: double occurrence of /etc/postfix/regexp in #2397
  • [improvement] consistently make 1 the default value for SPAMASSASSIN_SPAM_TO_INBOX in #2361
  • [docs] added sieve example for subaddress sorting in #2410
  • [feature] Add changedetector functionality for ${SSL_TYPE} == manual in #2404
  • [docs] docs(deps): bump mkdocs-material to v8.2.1 in #2422
  • [feature] Add SpamAssassin KAM in #2418
  • [improvement] refactoring: split helper functions into smaller scripts in #2420
  • [fix] fix: do not add accounts that already exists to account files in #2419

v10.4.0

This release upgrades our base image from Debian 10 to Debian 11. There is also an important regression fixed for SSL_TYPE=letsencrypt users.

  • [fix] A regression with check-for-changes.sh introduced in v10.3.0 affected SSL_TYPE=letsencrypt, preventing detection of cert renewals to restart services (unless using acme.json) #2326
  • [improvement] Base image upgraded from Debian 10 Buster to Debian 11 Bullseye #2116
    • Postfix upgraded from 3.4 to 3.5. Dovecot upgraded from 2.3.4 to 2.3.13. Python 2 is no longer included in the image, Python 3 remains (more information).
    • yescrypt is now supported upstream as a password hash algorithm, docker-mailserver continues to use SHA512-CRYPT (more information).
  • [chore] Dovecot statistics service disabled #2292

v10.3.0

WARNING: This release had a small regression affecting the detection of changes for certificates provisioned in /etc/letsencrypt with the config ENV SSL_TYPE=letsencrypt, unless you use Traefik's acme.json. If you rely on this functionality to restart Postfix and Dovecot when updating your cert files, this will not work and it is advised to upgrade to v10.4.0 or newer prior to renewal of your certificates.

  • [fix] The Dovecot userdb will now additionally create "dummy" accounts for basic alias maps (alias maps to a single real account managed by Dovecot, relaying to external providers aren't affected) when ENABLE_QUOTAS=1 (default) as a workaround for Postfix quota-status plugin querying Dovecot with inbound mail for a user, which Postfix uses to reject mail if quota has been exceeded (to avoid risk of blacklisting from spammers abusing backscatter) #2248
    • NOTE: If using aliases that map to another alias or multiple addresses, this remains a risk.
  • [fix] setup email list command will no longer attempt to query Dovecot quota status when ENABLE_QUOTAS is disabled #2264
  • [fix] SSL_DOMAIN ENV should now work much more reliably #2274, #2278, #2279
  • [fix] DKIM - Removed refile: (regex type) from KeyTable entry in opendkim.conf, fixes validation error output from opendkim-testkey #2249
  • [fix] DMARC - Removed quotes around the hostname value in opendmarc.conf. This avoids an authentication failure where an OpenDKIM header was previously ignored #2291
  • [fix] When using ONE_DIR=1 (default), the spool-postfix folder now has the correct permissions carried over. This resolves some failures notably with sieve filters #2273
  • [improvement] Warnings are now logged for ClamAV and SpamAssassin if they are enabled but Amavis is disabled (which is required for them to work correctly) #2251
  • [improvement] user-patches.sh is now invoked via bash to assist Kubernetes deployments with ConfigMap #2295

Internal

These changes are primarily internal and are only likely relevant to users that maintain their own modifications related to the changed files.

  • [chore] Redundant config from Postfix master.cf has been removed, it should not affect any users as our images have not included any of the related processes #2272
  • [refactor] check-for-changes.sh was carrying some duplicate code from setup-stack.sh that was falling out of sync, they now share common code #2260
  • [refactor] acme.json extraction was refactored into a CLI utility and updated to Python 3 (required for future upgrade to Debian 11 Bullseye base image) #2274
  • [refactor] As part of the Traefik acme.json and SSL_DOMAIN work, logic for SSL_TYPE=letsencrypt was also revised #2278
  • [improvement] Some minor tweaks to how we derive the internal HOSTNAME and DOMAINNAME from user configured hostname and domainname settings #2280

v10.2.0

  • You no longer need to maintain a copy of setup.sh matching your version release from v10.2 of docker-mailserver onwards. Version specific functionality of setup.sh has moved into the container itself, while setup.sh remains as a convenient wrapper to: docker exec -it <container name> setup <command>.
  • ONE_DIR now defaults to enabled (1).
  • For anyone relying on internal location of certificates (internal copy of mounted files at startup), the Postfix and Dovecot location of /etc/postfix/ssl has changed to /etc/dms/tls. This may affect any third-party user-patches.sh scripts that depended on this path to update certs.
  • The Let's Encrypt section of our SSL / TLS docs has been brought up to date.
  • [scripts] update setup.sh to now use a running container first if one exists #2134
  • [scripts] included setup.sh functionality inside the container to be version independent again #2174
  • [scripts] HOSTNAME and DOMAINNAME setup improved #2175
  • [scripts] delmailuser can now delete mailboxed without TLD #2172
  • [scripts] properly exit on failure (#2199 in conjunction with #2196)
  • [scripts] make setup.sh completely non-interactive for Podman users #2201

Security

Some internal refactoring and fixes happened this release cycle in #2196:

  • [improve] The Postfix and Dovecot location of /etc/postfix/ssl has changed to /etc/dms/tls
  • [improve] An invalid SSL_TYPE or a valid value with an invalid configuration will now panic, exiting the container and emitting a fatal error to the logs
  • [fix] An unconfigured/empty SSL_TYPE ENV now correctly disables SSL support for Dovecot and general Postfix configurations. A reminder that this is unsupported officially, and is only intended for tests and troubleshooting. Use only a valid SSL_TYPE (letsencrypt and manual are recommended) for production deployments
  • [fix] TLS_LEVEL=intermediate now modifies the system (container) openssl.cnf config to set the minimum protocol to TLS 1.0 (from 1.2) and cipher-suite support to DEFAULT@SECLEVEL=1 (from 2). This change is required for Dovecot in upcoming Debian Bullseye upgrade, to be compatible with the TLS_LEVEL=intermediate cipher-suite profile. It may affect other software within the container that relies on this openssl config, should you extend the Docker image #2193
  • [fix] Provide DH parameters (default: RFC 7919 group ffdhe406.pem) at build-time, instead of during startup. Custom DH parameters regardless of ONE_DIR are now only detected when mounted to /tmp/docker-mailserver/dhparams.pem #2192
  • [docs] Revise the Let's Encrypt section of our SSL / TLS docs #2209

Miscellaneous small additions and changes

  • [ci] improved caching #2197
  • [ci] refactored spam tests and introduced common container setup template #2198
  • [fix] update Fail2Ban wrapper to propagate errors to user #2170
  • [fix] Dockerfile sed's are now checked #2158
  • [general] Updated default value of ONE_DIR to 1 #2148
  • [docs] updated Kubernetes documentation #2111
  • [docs] introduced dedicated Podman documentation #2179
  • [docs] miscellaneous documentation improvements
  • [misc] introduced GitHub issue forms for issue templates #2160
  • [misc] Removed the internal mkcert.sh script for Dovecot as it is no longer needed #2196

v10.1.2

This is bug fix release. It reverts a regression introduced with #2104.

v10.1.1

This release mainly improves on v10.1.0 with small bugfixes/improvements and dependency updates

  • [feat] Add logwatch maillog.conf file to support /var/log/mail/ (#2112)
  • [docs] CONTRIBUTORS.md now also shows every code contributor from the past (#2143)
  • [improve] Avoid chmod +x when not needed (#2127)
  • [improve] check-for-changes: performance improvements (#2104)
  • [dependency] Update various dependencies through docs and base image
  • [security] This release contains also security fixes for OpenSSL

v10.1.0

This release mainly improves on v10.0.0 with many bugfixes.

v10.0.0

This release improves on 9.1.0 in many aspect, including general fixes, Fail2Ban, LDAP and documentation. This release contains breaking changes.

  • [general] Fixed many prose errors (spelling, grammar, indentation).
  • [general] Documentation is better integrated into the development process and it's visibility within the project increased (#1878).
  • [general] Added stop_grace_period: to example Compose file and supervisord (#1896 #1945)
  • [general] ./setup.sh email list was enhanced, now showing information neatly (#1898)
  • [general] Added update check and notification (#1976, #1951)
  • [general] Moved environment variables to the documentation and improvements (#1948, #1947, #1931)
  • [security] Major Fail2Ban improvements (cleanup, update and breaking changes, see below)
  • [fix] ./setup.sh email del ... now works properly
  • [code] Added color variables to setup.sh and improved the script as a whole (#1879, #1886)
  • [ldap] Added LDAP_QUERY_FILTER_SENDERS (#1902)
  • [ldap] Use dovecots LDAP uris connect option instead of hosts (#1901)
  • [ldap] Complete rework of LDAP documentation (#1921)
  • [docs] PRs that contain changes to docs will now be commented with a preview link (#1988)

Breaking Changes

  • [security] Fail2Ban adjustments:
    • Fail2ban v0.11.2 is now used (#1965).
    • The previous F2B config (from an old Debian release) has been replaced with the latest default config for F2B shipped by Debian 10.
    • The new default blocktype is now DROP, not REJECT (#1914).
    • A ban now applies to all ports (iptables-allports), not just the ones that were "attacked" (#1914).
    • Fail2ban 0.11 is totally compatible to 0.10, but the database got some new tables and fields (auto-converted during the first start), so once updated to DMS 10.0.0, you have to remove the database mailstate:/lib-fail2ban/fail2ban.sqlite3 if you would need to downgrade to DMS 9.1.0 for some reason.
  • [ldap] Removed SASLAUTHD_LDAP_SSL. Instead provide a protocol in SASLAUTHD_LDAP_SERVER and adjust SASLAUTHD_LDAP_ default values (#1989).
  • [general] Removed stable release tag (#1975):
    • Scheduled builds are now based off edge.
    • Instead of stable, please use the latest version tag available (or the latest tag).
    • The stable image tag will be removed from DockerHub in the near future.
  • [setup] Removed ./setup config ssl command (deprecated since v9). SSL_TYPE=self-signed remains supported however. (dc8f49de, #2021)

v9.1.0

This release marks the breakpoint where the wiki was transferred to a reworked documentation

v9.0.1

A small update on the notification function which was made more stable as well as minor fixes.

  • [fix] _notify cannot fail anymore - non-zero returns lead to unintended behavior in the past when DMS_DEBUG was not set or 0
  • [refactor] check-for-changes.sh now uses _notify

v9.0.0

  • [feat] Support extra user_attributes in accounts configuration (#1792)
  • [feat] Add possibility to use a custom dkim selector (#1811)
  • [feat] TLS: Dual (aka hybrid) certificate support! (eg ECDSA certificate with an RSA fallback for broader compatibility) (#1801).
    • This feature is presently only for SSL_TYPE=manual, all you need to do is provide your fallback certificate to the SSL_ALT_CERT_PATH and SSL_ALT_KEY_PATH ENV vars, just like your primary certificate would be setup for manual mode.
  • [security] TLS: You can now use ECDSA certificates! (#1802)
    • Warning: ECDSA may not be supported by legacy systems (most pre-2014). You can provide an RSA certificate as a fallback.
  • [fix] TLS: For some docker-compose setups when restarting the docker-mailserver container, internal config state may have been persisted despite making changes that should reconfigure TLS (eg changing SSL_TYPE or replacing the certificate file) (#1801).
  • [refactor] Split start-mailserver.sh (#1820)
  • [fix] Linting now uses local path to remove the sudo dependency (#1831).

Breaking Changes

  • [security] TLS: TLS_LEVEL=modern has changed the server-side preference order to 128-bit before 256-bit encryption (#1802).
    • NOTE: This is still very secure but may result in misleading lower scores/grades from security audit websites.
  • [security] TLS: TLS_LEVEL=modern removed support for AES-CBC cipher suites and follows best practices by supporting only AEAD cipher suites (#1802).
    • NOTE: As TLS 1.2 is the minimum required for modern already, AEAD cipher suites should already be supported and preferred.
  • [security] TLS: TLS_LEVEL=intermediate has removed support for cipher suites using RSA for key exchange (only available with an RSA certificate) (#1802).
    • NOTE: This only affects Dovecot which supported 5 extra cipher suites using AES-CBC and AES-GCM. Your users MUA clients should be unaffected, preferring ECDHE or DHE for key exchange.
  • [refactor] Complete refactoring of opendkim script (#1812).
    • NOTE: Use ./setup.sh config dkim help to see the new syntax.

v8.0.1

This release is a hotfix for #1781.

  • [spam] bl.spamcop.net was removed from the list of spam lists since the domain expired and became unusable

v8.0.0

The transfer of the old repository to the new organization has completed. This release marks the new starting point for docker-mailserver in the docker-mailserver organization. Various improvements were made, small bugs fixed and the complete CI was transferred.

  • [general] transferred the whole repository to docker-mailserver/docker-mailserver
  • [general] adjusted README.md and split off ENVIRONMENT.md
  • [ci] usage of the GitHub Container Registry
  • [ci] switched from TravisCI to GitHub Actions for CI/CD
    • now building images for amd64 and arm/v7 and arm/64
    • integrated stale issues action to automatically close stale issues
    • adjusted issue templates
  • [build] completely refactored and improved the Dockerfile
  • [build] improved the Makefile
  • [image improvement] added a proper init process
  • [image improvement] improved logging significantly
  • [image improvement] major LDAP improvements
  • [bugfixes] miscellaneous bug fixes and improvements

Breaking changes of release 8.0.0

  • [image improvement] log-level now defaults to warn
  • [image improvement] DKIM default key size now 4096
  • [general] the :latest tag is now the latest release and :edge represents the latest push on master
  • [general] URL changed from tomav/... to docker-mailserver/...

v7.2.0

  • [scripts] refactored target/bin/
  • [scripts] redesigned environment variable use
  • [general] added Code of Conduct
  • [general] added missing Dovecot descriptions
  • [tests] enhanced and refactored all tests

v7.1.0

  • [scripts] use of default variables has changed slightly (consult environment variables)
  • [scripts] Added coherent coding style and linting
  • [scripts] Added option to use non-default network interface
  • [general] new contributing guidelines were added
  • [general] SELinux is now supported